Important Facts You Need to Know About CNC Hot Wire Foam Cutters

What is a hot cord cnc foam cutter used for?

Hot cord foam cutters will reduce exclusive forms of foam, from insulation to fabrication, from emblems, surfboards and signs and symptoms to crown moldings and urban molds

Hot twine foam cutters are designed to cut exclusive kinds of foam

1. EPS – multiplied polystyrene

2. XPS – extruded polystyrene

three. EPP – improved polypropylene

Not for use for slicing cnc tube bending machine manufacturers – will result in toxic fumes

What are the primary additives that a foam cutter is manufactured from?

1. The software program is divided into two sections – layout software to layout the shapes to be cut, and the cutting software that controls the gadget

2. The hot wire tensioning mechanism

3. Effective slicing sizes for the horizontal, vertical and the wire duration

four. Number of axis – a 4 axis gadget can be able to reduce tapered shapes (like a cone or a jet wing)

Here are some functions to look for in a hot wire foam cutting system:

For production of crown molding:

1. Multiple wires – from 3 to 8 wires will boom the slicing potential from 2 to 7 times

2. Eight foot powerful cord length – don’t accept a 4′ gadget

3. If primary use of the device is to reduce emblems and signs – a smaller device will do the task

4. Cutting velocity – commonly material structured – mainly of thumb: the better the foam density – the slower the reducing pace

Hot Wire CNC Foam Cutter expenses:

CNC foam cutters will variety from $1500 to $50,000. The charge is a element of the machine size, the quantity of wires, the manner the wires are kept under anxiety.

Other foam reducing machines:

Another way to cut foam is with a CNC router – that is specifically for machining the foam and now not for slicing.

CNC routers for foam are generally used for 3-D shapes seen in Las Vegas, subject matter parts or even symptoms

Foam coating: EPS and XPS will soften if painted with oil-based totally paint. Painting consists of  steps:

1. Preparing the froth for coating – a primer should be used to prevent the coating material to penetrate the EPS beads

2. Coating – Coating is normally Epoxy (usually brushed) or Polyurethane (brushed or sprayed)

Once the foam is covered – it may be painted with any type of paint.

Leave a Comment